Performing CCI Operations
1–95
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
•
Example:
If the standard input device is shared between several command devices
and is already displayed as a target device, the target device will be
displayed as the comment shown below and will be omitted
.
Example:
If the standard input device does not have an appropriate mirror descriptor
(MU#), the target device will be displayed as the comment shown below and
will be omitted
.
Example:
If the device from the standard input co-reside between arrays with
different mirror control, the target device will be displayed as the comment
shown below and will be omitted.
Example:
NOTE: Remember to change the value of poll(‘0ms) parameter using the
equation.
Unit Ids are added in the order of the array product number. If multiple
command devices exist in the array, the device file that was shared
between the ports of the array will be selected, and will be handled as an
alternative command device.
If the standard input device includes a command device, the target device
will be displayed as the comment shown below and will be omitted.
# ERROR [CMDDEV] Harddisk5 SER =85006145 LDEV = 7 [DF600F-CM ]
# ERROR [LDEV LINK] Harddisk5 SER =85006145 LDEV = 3 [FIBRE FCTBL = 4]
# ERROR [LDEV MUN (2<1)] Harddisk5 SER =85006145 LDEV = 3 [DF600F ]
# ERROR [MIXING RAID TYPE] Harddisk5 SER =85006145 LDEV = 3 [DF600F ]
Summary of Contents for AMS 2000 Series
Page 6: ...vi Table of Contents Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 244: ...4 18 Command options Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 261: ...1 Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
