Maintenance log and tracing functions
3–31
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9608
008E
84
LU capacities of the P-VOL and V-
VOL are different.
Check the capacity of the LU.
9608
008F
84
When creating a pair specifying a
group ID, the specified group ID is
already used for a ShadowImage
pair.
Check the specified group ID.
9608
00A6
84
The operation cannot be
performed due to insufficient
capacity of the DP pool for the
specified P-VOL.
Check the capacity of the DP
pool.
9608
00A7
84
The operation cannot be
performed due to insufficient
capacity of the DP pool for the LUs
which belong to data pool.
Check the capacity of the DP
pool.
9608
00A8
84
Management information of
Dynamic Provisioning is being
updated.
Retry after waiting for a
while.
9608
00A9
84
The operation cannot be
performed due to insufficient
capacity of the DP pool for the P-
VOL of a pair in the same group.
Check the capacity of the DP
pool.
9608
00AA
84
The operation cannot be
performed due to insufficient
capacity of the DP pool for the LU
specified for data pool of a pair in
the same group.
Check the capacity of the DP
pool.
9608
00AB
84
The V-VOL of the specified pair is
the P-VOL of a TrueCopy or TCE.
Retry after deleting the
TrueCopy or TCE pair.
9608
00AC
84
Access attribute has been set to
the V-VOL of the specified
SnapShot pair.
Change the attribute to
Read/Write and reset S-VOL
Disable. If mode is set, reset
it using CCI. Then, delete the
pair.
9608
00AD
84
The memory reconfiguration
process is in progress.
Retry after the memory
reconfiguration process
completes.
9608
OOAE
84
The memory reconfiguration
process is in progress.
Retry after the memory
reconfiguration process
completes.
9608
00AF
84
The full capacity mode differs
between the P-VOL and data
pools.
Set both P-VOL and data
pools the same value.
9608
OOB0
84
The full capacity mode differs
between the P-VOL and data
pools.
Set both P-VOL and data
pools the same value.
9608
00B1
84
The status of the ShadowImage
pair cascading with the specified
SnapShot pair is invalid.
Check the status of the
ShadowImage pair.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents
Recommended Action
Summary of Contents for AMS 2000 Series
Page 6: ...vi Table of Contents Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 244: ...4 18 Command options Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 261: ...1 Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...