Maintenance log and tracing functions
3–65
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9629
0026
84
The RAID group of the specified P-
VOL and
S-VOL are the same.
Specify a different RAID
group.
9629
0027
84
The specified P-VOL is the
reserved LU.
Check the status of the LU.
9629
0028
84
The specified S-VOL is the
reserved LU.
Check the status of the LU.
9629
0029
84
The access level of the specified S-
VOL is other than the ordinary
one.
Check the access revel of the
LU.
9629
002C
84
The specified MU number is 8 or
higher.
Make sure of the specified MU
number.
9629
002D
84
The specified primary port number
is beyond the limits of support.
Check the specified primary
port number.
9629
002E
84
The specified secondary port
number is beyond the limits of
support.
Check the specified
secondary port number.
9629
002F
84
The specified primary sequence
number is different from the own
serial number.
Check the specified primary
sequence number.
9629
0030
84
The specified secondary sequence
number is different from the own
serial number.
Check the specified
secondary sequence number.
9629
0031
84
The pair concerned is the one that
the instruction to start the
migration was issued by Navigator
2 or HiCommand.
Check the owner ID of the
specified pair.
9629
0032
84
The disk drives that configure a
RAID group, to which the specified
P-VOL belongs have been spun
down.
Check the status of the RAID
group.
9629
0033
84
The disk drives that configure a
RAID group, to which the specified
S-VOL belongs have been spun
down.
Check the status of the RAID
group.
9629
0034
84
The data migration status is “data
is being copied”, “data copy fails”,
or “data copy is completed”.
Check the data migration
status.
9629
0035
84
The data migration status is
“access path is being switched” or
“access path switching fails”.
Check the data migration
status.
9629
0036
84
The RAID group to which the
specified LU belongs indicates a
status other than Normal.
Retry after the status
becomes Normal.
9629
0037
84
The LU created in DP pool was
specified as P-VOL or S-VOL.
Specify an LU other than the
LU created in DP pool.
9629
0038
84
The specified P-VOL and S-VOL are
LUs in the same DP pool.
Check the specified LUs.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents
Recommended Action
Summary of Contents for AMS 2000 Series
Page 6: ...vi Table of Contents Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 244: ...4 18 Command options Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 261: ...1 Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...