When a timer is being switched on, if that zone is stopped, it will request to switch on the zone or not.
8.13.2.1 Setting of timer for Room Thermostats
Setting of temperature or change of operation state from ON to OFF for a defined period, after which operation returns to the
previous settings. Manual operation of the unit controller has priority over schedule settings.
Copy to circuit 2:
It is possible to copy the schedule
timer to circuit 2.
Reset configuration:
Press OK button to reset scheduled timers.
Timer status:
• Disable
•
Enable
Timer configuration:
New
screen appears to configure a
schedule timer. See explanation
below.
Pressing the OK button with “Timer Configuration” being selected displays the detailed schedule screen. The active schedule timers
are shown in a weekly calendar.
Up to six timer events can be defined for each weekday, and these can be used for turning the operation ON or OFF or to change
the setting temperature. Pressing the OK key with one of the weekdays being selected in the weekly calendar screen displays the
detailed schedule for the weekday.
YUTAKI CASCADE CONTROLLER
PMML0575 rev.1 - 09/2021
124
