ENGLISH
8.13.2.2 Setting of timer for Circuit 1/2
To change the operation mode (ECO or Comfort) or change of operation state from ON to OFF for a defined period, after which
operation returns to the previous settings. Manual operation of the unit controller has priority over schedule settings.
Copy to circuit 2:
It is possible to copy the schedule
timer to circuit 2.
Reset configuration:
Press OK button to reset scheduled timers.
Timer status:
• Disable
•
Enable
Timer configuration:
New
screen appears to configure a
schedule timer. See explanation
below.
Pressing the OK button with “Timer Configuration” being selected displays the detailed schedule screen. The active schedule timers
are shown in a weekly calendar.
Up to six timer events can be defined for each weekday, and these can be used for turning the operation ON or OFF or operation
mode (ECO or Comfort). Pressing the OK key with one of the weekdays being selected in the weekly calendar screen displays the
detailed schedule for the weekday.
Pressing the “Gear” button during the edition of the timer events for a given weekday displays a menu to copy the daily pattern to
other weekdays or to suppress the selected timer event.
YUTAKI CASCADE CONTROLLER
PMML0575 rev.1 - 09/2021
127
