7.13.1.1 Live view
Live view is a summary of system status information shown on operation information.
It has the following screens:
Refrigerant Cycle
Considerations:
•
Arrows move in anti-clock direction in Heating mode. When Cooling arrows move in clock direction.
•
Pipes between exchangers are pink if operating or gray if unit is in thermo off.
• T
WO
pipe is orange when heating and blue when cooling.
• T
WI
pipe is orange when cooling and blue when heating.
•
Defrost indication is only shown when defrosting.
• T
WO
value is T
WO
HP when using a YUTAKI S COMBI or YUTAKI S, otherwise it is normal
T
WO.
Water generation
Considerations:
•
When operation status is COOL ON, inlet pipe is orange, outdoor pipe is blue.
•
When operaion status is HEAT ON, SWP ON or DHW ON, inlet pipe is blue, outdoor pipe is orange, otherwise pipe is in gray.
• T
WO
value is TwoHP when using a YUTAKI S COMBI or YUTAKI S, otherwise it is normal T
WO.
•
Pump 1 icon is shown when it is operating.
•
Heater indication is shown always except:
-
Cooling Operation
-
Heater is disabled by DSW
•
If maximum heater step is disabled, the disabled steps are shown as disabled.
UNIT CONTROLLER
PMML0575 rev.1 - 09/2021
72
