7.13.3.3 Setting of timer for Hot water tank or Swimming Pool
Setting the temperature or change of operation state from ON to OFF for a defined period, after which operation returns to the
previous settings. Manual operation of the unit controller has priority over schedule settings.
Reset configuration:
Press OK button to reset scheduled
timers.
Timer status:
Disable
Enable
Timer configuration:
New screen appears to
configure a schedule timer.
See explanation below.
Pressing the OK button with “Timer Configuration” being selected displays the detailed schedule screen. The active schedule timers
are shown in a weekly calendar.
Up to six timer events can be defined for each weekday, and these can be used for turning the operation ON or OFF or to change
the setting temperature. Pressing the OK key with one of the weekdays being selected in the weekly calendar screen displays the
detailed schedule for the weekday.
Pressing the “Gear” button during the edition of the timer events for a given weekday displays a menu to copy the daily pattern to
other weekdays or to suppress the selected timer event.
UNIT CONTROLLER
PMML0575 rev.1 - 09/2021
82
