15
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
S Y M P T O N
S Y M P T O N
S Y M P T O N
S Y M P T O N
S Y M P T O N
No power even
when POWER is
set to 'ON'.
CD will not play
No sound
Sound skips
Humming Noise
C A U S E
C A U S E
C A U S E
C A U S E
C A U S E
Poor plug connection.
Fuse in unit is blown.
Disc is loaded upside
down.
Disc is dirty.
Disc code error.
Improper output
cable connections.
Improper amplifier
operation.
Player is subject to
vibrations or physical
shock.
Laser lens is dirty.
Disc is dirty.
Loose cable
connections.
A C T I O N
A C T I O N
A C T I O N
A C T I O N
A C T I O N
Insert power plug firmly into AC
outlet.
Check fuse. Check socket.
Reload disc with label facing
towards the front.
Clean disc with a soft cloth.
Wipe in a straight motion from
inside to outside of the disc.
Reload disc and wait ten
seconds, then switch unit back
on and retry.
Check output cable for breaks
and short circuits.
Make sure that amplifier controls
are set properly. Check master
output level.
Change the installation location.
Clean using a quality laser lens
cleaner.
Clean disc.
Firmly connect all audio plugs.
