97
English
• SPECIFICATIONS
•
AM-FM TUNER AMPLIFIER SECTION (HTA-R100E)
Reception frequency band:
FM: 87.50 MHz – 108.00 MHz (0.05 MHz step)
MW: 522 kHz – 1,611 kHz (9 kHz step)
LW: 153 kHz – 281 kHz (1 kHz step)
Rated output power:
40 W + 40 W (6
Ω
/ohms, 1kHz, T.H.D. 10%)
Audio input / output jacks:
CD input jacks, TAPE input/output jacks,
AUX input jacks, MD input/output jacks,
PRE OUT (MONO) jack, headphones jack
Power supply:
AC 230 V, 50 Hz
Power consumption:
74 W (ECO-ON mode : 0.8 W)
Maximum external dimensions:
210 (W) x 96.5 (H) x 350 (D) mm
(including feet, controls and terminals)
Weight:
4.5 kg
•
CD CHANGER SECTION (DA-R100E)
Sampling frequency:
44.1kHz
Optional source:
Semiconductor
Power supply:
AC 230 V, 50 Hz
Power consumption:
12 W
Maximum external dimensions:
210 (W) x 96.5 (H) x 340 (D) mm
(including feet, controls and terminals)
Weight:
3.2 kg
•
SPEAKER SECTION (HS-R30)
System:
2 way BASS Reflex Speaker System
Woofer:
10 cm x 1
Tweeter:
5 cm x 1
Impedance:
6 ohms
Maximum external dimensions:
150 (W) x 275 (H) x 227 (D) mm
Weight:
3.0 kg (1 speaker)
•
TIMER SECTION
System:
Digital Quartz Clock
Display Format:
24-hour cycle
Timer Accuracy:
Within 60 seconds at monthly rate
•
REMOTE CONTROL SECTION
Remote control system:
Infrared pulse
Power supply:
Two DC 1.5V R6P/AA batteries
Maximum external dimensions:
54 (W) x 27 (H) x 172.5 (D) mm
Weight:
145g (including batteries)
Specifications are subject to change for performance improvement without notice.
Protector circuit
• The AX-F300E is equipped with a high speed protector circuit.
This circuit protects internal parts from being damaged by strong currents generated in the unit should the unit
be operated when the speaker terminals are incompletely connected or short-circuited.
If this protector circuit is activated, a relay sound is produced, the output to the speakers is interrupted, and
the “ON/STANDBY” indicator blinks rapidly to indicate that there is a problem. If this should happen, unplug the
power cord, and contact your store of purchase.
• The unit may not operate properly due to external influences such as lightning or static electricity. If this
happens, either turn off the power with the power operation switch or unplug the power cord, wait for
approximately 5 seconds, then plug the power cord back in.
Summary of Contents for AXF300E
Page 119: ...119 ...
