background image

7

Used correctly, domestic batteries are a safe and dependable source 

of portable power. Problems can occur if they are misused or abused 

– resulting in leakage or, in extreme cases, fire or explosion.

Here are some simple guidelines to safe battery use designed to 

eliminate any such problems.

Take care to fit your batteries 

correctly, observing the plus and 

minus marks on the battery and 

appliance. Incorrect fitting can cause 

leakage or, in extreme cases, fire or 

even an explosion.

Replace the whole set of batteries at 

one time, taking care not to mix old 

and new batteries or batteries of 

different types, since this can result in 

leakage or, in extreme cases, fire or 

even an explosion.

Remove dead batteries from 

equipment and all batteries from 

equipment you know you are not 

going to use for a long time. 

Otherwise the batteries may leak and 

cause damage.

Store unused batteries in their 

packaging and away from metal 

objects which may cause a 

short-circuit resulting in leakage or, in 

extreme cases, fire or even an 

explosion.

Never dispose of batteries in fire as 

this can cause them to explode. 

Please recycle dead batteries; do not 

put with the normal household 

waste.

Supervise children if they are 

replacing batteries themselves in 

order to ensure these guidelines are 

followed.

Never attempt to recharge ordinary 

batteries, either in a charger or by 

applying heat to them. They may 

leak, cause fire or even explode. 

There are special rechargeable 

batteries which are clearly marked as 

such.

Remember that small button cell 

batteries such as used in some 

hearing aids, toys, games and other 

appliances, are easily swallowed by 

young children and this can be 

dangerous.

Make sure battery compartments are 

secure.

Keep loose button cells away from 

young children.

Seek medical advice if you believe a 

cell has been swallowed.

•  Read all the instructions carefully before 

using the unit and keep them for future 

reference.

•  Retain the manual. If you pass the unit 

onto a third party make sure to include this 

manual.

•  Check that the voltage marked on the 

rating label matches your mains voltage.

Damage
•  Please inspect the unit for damage after 

unpacking.

•  Do not continue to operate the unit if you 

are in any doubt about it working normally, 

or if it is damaged in any way - switch off, 

withdraw the mains plug and consult your 

dealer.

Location of Unit
•  The unit must be placed on a flat stable 

surface and should not be subjected to 

vibrations.

•  Do not place the unit on sloped or unstable 

surfaces as the unit may fall off or tip over.

•  The mains socket must be located near the 

unit and should be easily accessible.

•  This unit is designed for indoor use only.
Temperature
•  Avoid extreme degrees of temperature, 

either hot or cold. Place the unit well away 

from heat sources such as radiators or gas/

electric fires.

•  Avoid exposure to direct sunlight and other 

sources of heat.

Naked Flames
•  Never place any type of candle or naked 

flame on the top of or near the unit.

Moisture
•  To reduce the risk of fire, electric shock or 

product damage, do not expose this unit 

to rain, moisture, dripping or splashing. No 

objects filled with liquids, such as vases, 

should be placed on the unit.

•  If you spill any liquid into the unit, it can 

cause serious damage. Switch it off at the 

mains immediately. Withdraw the mains 

plug and consult your dealer.

Ventilation
•  To prevent the risk of electric shock or 

fire hazard due to overheating, ensure 

that curtains and other materials do not 

obstruct the ventilation vents.

•  Do not install or place this unit in a 

bookcase, built-in cabinet or in another 

confined space. Ensure the unit is well 

ventilated.

Safety
•  Always disconnect the unit from the mains 

supply before connecting/ disconnecting 

other devices or moving the unit.

•  Unplug the unit from the mains socket 

before a lightning storm.

•  In the interests of safety and to avoid 

unnecessary energy consumption, 

never leave the unit switched on while 

unattended for long periods of time, e.g. 

overnight, while on holiday or while out of 

the house. Switch it off and disconnect the 

mains plug from the mains socket.

Mains Cable
•  Make sure the unit or the unit stand is not 

resting on top of the mains cable, as the 

weight of the unit may damage the cable 

and create a safety hazard.

•  Make sure the mains socket is easily 

accessible.

Earphones
•  Listening to loud sounds for prolonged 

periods of time may permanently damage 

your hearing.

•  Before putting on earphones, turn the 

volume down then put the earphones on 

and slowly increase the volume until you 

reach a comfortable listening level.

Interference
•  Do not place the unit on or near appliances 

which may cause electromagnetic 

interference. If you do, it may adversely 

affect the operating performance of the 

unit, and cause a distorted picture or sound.

Safety Warnings

AXM1205E_IB_01GB_121112_Michelle.indd   7

12/11/2012   5:48 PM

Summary of Contents for AXM1205E





































Reviews: