background image

DAB+/DAB Display Modes

Press MENU/INFO on the unit or INFO on the remote control, the display will switch 

through the following display modes.
The information of each display mode is displayed on the lower segment of the display.

DLS (Dynamic Label Segment)

Dynamic label segment is a scrolling message 

that the broadcaster may include with their 

transmissions. The message usually includes 

information, such as programme details etc.

Signal Strength

This shows a slide bar to indicate the signal strength, 

the stronger the signal, the longer the bar will be 

from left to right.

Programme Type

This describes the “style” or “genre” of the 

programme that is being broadcast.

Ensemble

This displays the name of the multiplex that contains 

the station you are listening to. A multiplex is a 

collection of radio stations that are bundled and 

transmitted on one frequency. There are national 

and local multiplexes. Local ones contain stations 

that are specific to that area.

DAB – unlike normal radio, groups together several radio 

stations and transmits them on one frequency.

Frequency

This displays the frequency of the present station, 

such as “11C 220.352MHz”.
Signal Error
This displays a number showing the error rate. If the 

number is 0, it means the signal received is error free 

and the signal strength is strong. If the error rate is 

high, it is recommended to re-orient the aerial or 

re-position the unit.

Audio Bit Rate

The display will show the digital audio bit rate being 

received.

Time

This displays the current time provided automatically 

by the broadcaster. 

Date

This displays the current date provided automatically 

by the broadcaster. 

DLS

Signal Strength

Audio Bit Rate

Signal Error

Programme Type

Ensemble

Frequency

Time

Date

GB

21

Summary of Contents for axm525dbe

































Reviews: