Storing and recalling presets
The numeric buttons (1-9) enable you to store radio stations
for one-touch access.
To store a station
You can store a station to a preset while listening to it or when
you see the station name on the bottom line of the display
while scrolling through the station list.
Press and hold down a numbered button for around two
seconds to store the station under that number. The display
show e.g. "Preset 1 saved" when the station has been
successfully saved. Once you save a station to a preset, the
station name has the preset number next to it on the station list.
AMPLIFIER AND TUNER
To recall a previously stored station
Press the numeric button 3 under which you stored the station.
If the selected preset is empty, the display shows "No Station
Available". Please select another preset and make sure the
preset has station stored.
Manual tune
This option provides a signal level display which you can use
to find the best position for your radio and aerial.
When you select this option, the bottom line of the display
shows the channel identifier and frequency. Press "MENU"
button 5 or 43, rotate "MULTI FUNCTION" knob 8 to "Manual
tune" and press "SELECT" knob 17 or 41. Then turn the
"MULTI FUNCTION" knob 8 to choose your favorite frequency.
Press "SELECT" button 17 or 41 again to confirm.
1.
The list includes all channels, UK stations are in the
range 11B to 12D. You see a signal level display. The empty
block indiactes the minimum required level for reception and
the solid blocks indicate the current level.
2. Move your aerial or radio whilst watching the display and
to try to raise the current level to the empty block or beyond.
The display will change to show the multiplex name on the
bottom line of the display once a good signal is received
and the multiplex will be added to the service list.
3. Press "MENU" button 5 or 43 to exit manual tuning or
turn the "MULTI FUNCTION" knob 8 to select another
channel.
Note
18
