General Operation
STANDBY
mode.
The LED indicator will not light up.
•
Press on the unit or the remote control to switch the unit to
ON
mode. The LED
indicator will light up blue.
•
Press
to switch the unit back to
STANDBY
mode. The LED indicator will not light up.
•
completely.
When the unit volume is close to mute or is idle for approximately 15 minutes, it will
automatically switch to Standby.
Selecting Modes
Press
MODE
on the unit or the remote control to switch between
AUX
and
OPTICAL
and
BLUETOOTH
mode.
if in
BLUETOOTH
mode.
The LED indicator will light up green if in
AUX
mode and red if in
OPTICAL
and blue
AUX mode is the default mode every time the unit is switched on.
Adjusting the Volume
•
Press
VOL +/–
on the unit or the remote control to adjust the volume.
Attaching Self Adhesive Pads
•
Peel back the adhesive cover on the foot pad.
•
Press the pads firmly to ensure they are well secured.
•
Align and attach the adhesive side of the pad to the foot pad cutaway section on
the bottom of the soundbar.
•
on the remote control. Press again to
resume normal listening.
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
•
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
•
•
Do not spray aerosol at or near the unit.
16
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Summary of Contents for AXS014BTU
Page 2: ......