15
Checking after installation
1. Turn on the water tap and close the washing machine door.
2. Press the Power On-Off button to switch power on.
3. Select the AI Wash program and press the Start/Pause button.
4. After 5 minutes, check if there is no water leakage from anywhere.
5. Press the Power On-Off button to switch power off.
6. Press the Power On-Off button again to switch power on.
7. Select the Spin program and press the Start/Pause button.
8. Check if there is no abnormal vibration or sound, and that water is drained out properly.
If any of the following conditions or other abnormalities occur, immediately pull out the power plug to
prevent an accident and contact your local service center.
■
The washing machine does not operate when you switch power on.
■
The power cord has cracks.
■
There are abnormal vibrations and sounds during operation.
■
There is a smell of burning.
Before the
fi
rst wash
Select the Cotton program with water temperature at 60ºC setting and allow the unit to wash without
clothing. This will remove residues and water that may have been left in the drum during manufacturing.
Customer Service
In case of malfunction of the washing machine, please check these Operating & Installation instructions
carefully before you call for repair services.
If you are unable to identify or solve the problem, please contact your local service center.
Before calling, make a note of the model name, serial no. and purchase date of your washing machine.
You can
fi
nd the model name and serial no. on the label attached to the inside of
fi
lter cover.
Model Name : XX-XXXXXX
Serial No :
XXXXXXXX
Summary of Contents for BD-100GV
Page 67: ...67 Memo ...
Page 68: ...3WPL147262 ...