34
How to put the detergent and softener (Continue)
The standard amount setting.
It is necessary to set the standard volume (volume used per 30 L of water) according to the liquid detergent
or fabric softener used. Liquid detergent and fabric softener cannot be set at the same time.
Procedure
1
Press
to switch on.
2
To set the standard amount of liquid
detergent
Press
for at least 5 seconds.
To set the standard amount of fabric
softener
Press
for at least 5 seconds.
*The standard amount is displayed as shown
in the display example. (as per fixture)
At the time or shipment from the factory, the
standard amount is set for a water volume of 30 L.
– For liquid detergent 35 mL
– For fabric softener 30 mL
Ex)
3
Check and set the “amount used for
30 L of water” written on the container.
The amount can be set from 10 to 80 ml.
To reduce the amount, press
.
To increase the amount, press
.
Check the
recommended
amount of liquid
detergent or
fabric softener
to use.
If this information is not available,
please contact the detergent
manufacturer.
4
Press
to set up.
■
When changing the type of liquid detergent or fabric softener
●
Clean the dispenser mounting part of the automatic loading section
fi
rst.
If different types are mixed together, they can clog the automatic loading section and the channels.
●
Change the standard amount setting for liquid detergent or fabric softener.
If you run the machine without setting the standard amount of liquid detergent or fabric softener,
the laundry may not be easily cleaned, and it may cause darkening or yellowing.In addition, a large
amount of bubbles may be generated, which may cause water leakage or overflow from the drain.
■
How to read the remaining amount of liquid detergent and fabric softener
"Empty" will flashes when the liquid detergent or fabric softener in the fabric softener dispenser is low.
Refill with liquid detergent or fabric softener.
Summary of Contents for BD-100GV
Page 67: ...67 Memo ...
Page 68: ...3WPL147262 ...
