54
Care and Maintenance (Continue)
4
Clean the cover.
Open the cover, pull it toward you, and remove the hook from the recess.
Rinse off dirt on the cover.
If it is very dirty, soak it in hot water (about 40°C) for about 10 minutes and wipe it off with a
damp cloth.
Softener cap
Fabric softener
dispenser cover
Liquid detergent
dispenser cover
Hook
Recess
* If the softener cap is not installed correctly, it will not flow properly.
5
Clean the inside of the dispeser.
Remove
fl
oat cover and
fl
oat from dispeser
Rinse the dirt inside the dispeser
●
Rinse the inside of the dispeser until there is no foaming or sliminess.
●
If it is extremely dirty, soak it in hot water (about 40°C) for about 10 minutes and wipe
it off with a damp cloth.
Liquid detergent/
Fabric softener dispenser
Float cover
Float
* When you install the float, please check if the light blue side of the float faces down.
* When installing float cover, push it until you hear a "click".
6
Reinstall the dispenser.
Install the dispenser cover.
Press until you hear a "click".
Install the dispenser to the washing machine.
If it is not installed securely, it will not be automatically charged during operation and may
cause liquid detergent or fabric softener to leak.
Summary of Contents for BD-100GV
Page 67: ...67 Memo ...
Page 68: ...3WPL147262 ...