56
Care and Maintenance (Continue)
Cleaning the fabric softener route.
[Preparation] Open the tap.
1
Open the cover of the fabric softener dispenser and
fi
ll the dispenser with hot
water (about 40°C).
Fill with the hot water up to [Max] mark.
2
Close the cover of the fabric softener dispenser.
3
Follow the instructions below to start the cleaning operation.
You cannot use the liquid detergent and setting at the same time.
Press
to turn on the machine.
Press
for at least 3 seconds.
Press and hold the button after the tone and the number will appear in the remaining time
display.
Press
and select [4 minutes] or [9 hours].
Each time you press the button, the display switches between [More] and [Less] and the
time will be shown in the remaining time display.
4
Press
to start the machine.
After the time set above has elapsed, the machine will beep and turn off automatically.
After cleaning, remove the liquid detergent dispenser or softener dispenser, discard any remaining water
and wipe the inside of the dispenser and the area around the dispenser mounting part thoroughly with a
soft cloth.
Summary of Contents for BD-100GV
Page 67: ...67 Memo ...
Page 68: ...3WPL147262 ...
