26
If the appliance does not work or it stops during operation.
First try to find a solution to the problem, if not, contact the service centre.
Description
Reason
Solution
Restart after the door is closed
Check if the clothes is stuck
Door is not closed properly
Door can’t be
opened
Washer's safety protection
design is working
Disconnect the power, restart the product
Please be noted that when the temperature
inside the drum is high, the door cannot be
opened until the temperature is lowered to
a certain level.
Water leakage
The connection between inlet
pipe or outlet hose is not tight
Check and fasten water pipes
Clean up outlet hose
Clean and wipe the detergent
box
Abnormal noise
Check if the fixing (bolts) have
been removed
Check
it’s installed on a solid and level floor
Indicator or display
does not light
Disconnect the power
PC board or harness has
connection problem
Check if the power is shut
down and
the power plug is connected correctly
Washing machine
cannot start up
Detergent residues
in the box
Detergent is dampened
or agglomerated
Description
Reason
Solution
Check if the water pressure is
too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Check
if the drain hose is blocked
Water injecting problem
while washing
Overtime water draining
Please try again first, call up
service line if there are still
troubles
Others
Water overflow
This is caused by a faulty
device sensor.
Restart the washer
Restart after the door is closed
Check if the clothes is stuck
Door is not closed properly
After
the check, activate the appliance. If the problem occurs or the display
shows other alarm codes again, contact the service centre.
Maintenances
Troubleshooting
Error Codes
NOTE
●