10
Control Panel Functions
Buttons that function differently when held for 3 seconds after turning on the power
Turn the Tangle-Free Finish function on or off.
(P. 73)
Turn the Fluffy Clothes function on or off.
(P. 73)
Change the operation start/finish sound.
(P. 68)
Turn the pre-finish sound on or off.
(P. 68)
Remaining time, amount of
detergent, delay time, and error
code indicators (P. 28, 62)
Indicates the amount of detergent and the
remaining time after operation starts.
Displays the delay time with each press
of the <DELAY START> button.
z
After the delayed operation starts, only
[DELAY] is displayed.
Blow hot air onto
laundry to activate the
detergent for more
complete cleaning.
z
[HOT WASH] is
displayed when this
function is set, and blinks
during the operation.
z
This function cannot be
used in the [BLANKET],
[DELICATE] and
[TUB CLEAN] programs,
and <<DRY>>
operations.
Using the HOT WASH
function (P. 72)
Operation status indicators (indicate the current operation)
LOAD SENSING
z
Weighing laundry.
BALANCING
CLOTHES
z
Untangle operation in progress to
correct concentration of laundry on
one side.
ADDING
DETERGENT
z
Dissolving detergent.
REVIEWING
TIME
z
Reviewing the remaining time during
drying.
DRAINING
z
Draining water.
TUB COOLING
z
Cooling the inside of the drum.
REMOVING
FOAM
z
Removing excess foam. (After
draining water, water for removing
foam is injected from the front side
of the drum for up to 15 minutes.)
WIND IRON
z
Appears when a program that
includes the [WIND IRON] operation
is selected. Blinks during the
[WIND IRON] operation.
PAUSE
z
Pausing.
FLUFFY
CLOTHES
z
Continuing drum rotation to maintain
softness of laundry after drying.
Adjust the spin speed
or level of drying to
one of three levels:
[EXTRA], [REGULAR],
or [MILD].
z
The factory default
setting is [REGULAR].
Adjusting the spin
speed and level of
drying (P. 69)
Change the combination or
settings of <WASH>, <RINSE>,
<SPIN>, and <DRY> cycles.
z
Press the <PAUSE> button after the
machine starts to change the settings.
The settings cannot be changed after
the <WASH> cycle finishes, or when
only the <WASH> cycle is operated.
z
The settings cannot be changed
for some programs.
Changing the cycle settings
(P. 59, 64, 65)
Press the
<STEAM IRON>
button to steam
out wrinkles of
clothes.
z
[STEAM IRON]
is displayed
when this
function is set.
Using the
STEAM IRON
function (P. 56)
Detergent indicator (P. 28)
Indicates the recommended amount of
detergent to use.
