92
Symptom
Possible cause
Solution
<
A
U
T
O S
E
L
F
C
L
E
A
N
>
f
u
n
c
tio
n
The ‘WASH’
indicator of the
<AUTO SELF
CLEAN> function
goes off.
Did you select a program for which you cannot
set the <AUTO SELF CLEAN> 'WASH'
operation?
Select a program for which you can set the
<AUTO SELF CLEAN> 'WASH' operation.
(P. 4)
Is the indicator for the number of rinse cycles
turned off?
If no rinse operation is set, the ‘WASH’ indicator
will not light.
The <AUTO
SELF CLEAN>
operations cannot
be set.
Did you select a program or settings for which
you cannot set the <AUTO SELF CLEAN>
operations?
Select a program or settings for which you can set
the <AUTO SELF CLEAN> operations.
(P. 4)
The <AUTO SELF
CLEAN> operation
has been set but
does not occur.
Is the laundry concentrated on one side?
This is not a malfunction.
The orange LED
of the <AUTO
SELF CLEAN>
function is lit after
operations.
z
The machine is on standby for the
<AUTO SELF CLEAN> 'DRY' operation to
start.
This is not a malfunction.
After opening the door and removing the laundry,
close the door, and press the <START> button.
Problems during operations
Symptom
Possible cause
Solution
Oper
ations
Rinse operations
differ from the
settings.
Is the laundry concentrated on one side?
z
If so, another rinse operation may be added
to correct this. (The remaining time indicator
will increase, but the display for the number of
rinse operations will not.)
Load laundry into the drum carefully to avoid
concentration on one side.
(P. 21, 22)
Did you add excessive amount of detergent?
z
If foaming is excessive during the rinse and
spin operations, the setting will be changed to
Water-Injection Rinse to reduce the foam.
Refer to the detergent indicator to determine the
appropriate amount of detergent.
(P. 28, 29)
z
If the laundry could not be evenly distributed
during the spin process of a rinse operation,
the setting will change to Water-Injection Rinse
automatically.
This is not a malfunction.
z
When two or more rinse cycles are set, the first
rinse operation will always be Sprinkle Rinse.
(P. 66)
This is not a malfunction.
[EX] is lit, but water
injection does not
occur.
z
Softener is added during the final rinse. In
order to mix in the softener, Water-Injection
Rinse will automatically change to Normal
Rinse during the final rinse.
This is not a malfunction.
The machine
returns to the rinse
operation during
the spin operation.
Did the laundry gravitate to one side during the
final spin?
z
If so, the machine will return to the rinse
operation to correct this.
This is not a malfunction.
The drum rotation
speed changes
during the spin
operation.
z
The drum rotation speed adjusts automatically
according to the wash load size and
distribution.
This is not a malfunction.
Troubleshooting
(continued)