8
Before You Start Washing
For safety precautions,
please note the washer dryer DOOR LOCK mechanism setting
To prevent children from opening the door and getting trapped inside the drum, you can manually lock the door so that it cannot be
opened when the power is off, before or during operations.
Apart from the DOOR LOCK function, users can also set the DOOR LOCK PREVENTION function to keep the door unlocked to
prevent children from getting trapped inside the drum.
By setting up the lock prevention function, the door cannot be locked.
However entering inside the drum is still dangerous even with the lock prevention function.
Press
Power
button to turn on the power.
To set the DOOR LOCK
To release the DOOR LOCK
Close the door, and hold
Door Lock
button for at least 3 seconds.
Hold
Door Lock
button
for at least 3 seconds.
When the washer dryer beeps twice and
Door Lock
appears, the setting
is complete and the door is locked.
The
indicator lights and
Door Lock
appears.
When the washer dryer beeps once
and
Door Lock
disappears, the
setting is released and the door is
unlocked.
The
indicator turns off and
Door Lock
disappears.
•This setting will be saved.
• The
Door Lock
will remain set and the door will remain locked even when the power turns off after an operation
fi
nishes.
To open the door, turn on the power and release the setting.
Operation of the DOOR LOCK PREVENTION function
How to set up the DOOR LOCK PREVENTION function
How to release the DOOR LOCK PREVENTION function
How to deactivate the DOOR LOCK PREVENTION function
- Open the door, and remove the Knob Stopper using an item with a thin point (such as a pin).
- Close the door and open it again, then the DOOR LOCK PREVENTION function is activated.
The door cannot be locked.
The Knob Stopper is the important item to deactivate the DOOR LOCK PREVENTION function.
Please store it with care after removing.
In order to operate the washer dryer or set the DOOR LOCK function, please slide the
DOOR LOCK PREVENTION knob upwards so that the DOOR LOCK PREVENTION
function is released and the door can be locked.
The
“Door Check”
code will appear if the operation is started without releasing the
DOOR LOCK PREVENTION function.
If the door is opened after the door being locked, the DOOR LOCK PREVENTION
function is set again.
Slide the DOOR LOCK PREVENTION Knob upwards (shown as below) and then place the stopper back in.
Pull out slantly in the direction of the arrow
Knob Stopper
DOOR LOCK
PREVENTION
Knob
DOOR LOCK PREVENTION Knob
Door Handle
Knob Stopper
Operation of the DOOR LOCK function
BD-SG100CJ_OM&IM_EN.indd 8
BD-SG100CJ_OM&IM_EN.indd 8
2019/5/13 14:22:26
2019/5/13 14:22:26
