11
1
2
Please turn on the water tap to check to connecting condition of the water supply hose
before washing.
আᘺ⠥ԊŊ⦼҅༌ᖛ㕻ㆊŊᒑውͧᖛᾷ᱿Ⳑᨊᗼȯ
• To prevent damages caused by water leakage due to loose screw.
ॖኞ➦⸎㌂⌉Ŋሳߌភᖛ≟ཫ⎐ʃൕ⣬᱿ံदȯ
Water tap
ᖛ㕻ㆊ
Do not allow water tap, one touch joint and rubber ring
to touch the washing machine when installing them.
મ⡶ᖛ㕻ㆊȮ͵࿌Ⳑݽ˫ד᭔ᆹŊᘜาӲ⩕Ωᷤ
ӷᘺ⠥ᑨᑨ㋤ȯ
Ș
Installing
મ⡶ᅞᘍ
Push down the rubber ring
and insert the tap into the
one touch joint.
૽᭔ʁࣱŊᤋരတҘ͵࿌
Ⳑݽҙȯ
Release the rubber ring and
push up the water supply
hose until it clicks.
ᄍ᭔ŊʀࣱͧᖛᾷŊ
᳅⎏ᱹӛơצƢ᱿⽁ℤ⊖
ᣅᔋȯ
• Pull the water supply hose to
confi rm that it does not come
off easily.
ཚɺཚͧᖛᾷŊᷨ⦓ͧᖛᾷ
ʃሳ⌉┛ȯ
1
Turn off the water tap.
〦ᖛ㕻ㆊȯ
2
Press the start button and let the machine run for about
ten seconds.
ྈʁ
ం
Ւྈ⸹Ŋ⳥Ⱨ
10
ấ⾝ȯ
• This is to prevent water splashing when removing the tap.
ᣅʴ〾ᔋབྷֲᆹᖛ␕߈ᡄȯ
3
Remove the latch and the water supply hose while
pushing down the rubber ring.
㌂ၒ༗Ŋཚʁ᭔Ŋᆹ૽ͧᖛᾷཥʁȯ
Turn the union nut in the direction as
shown by the arrow and fi rmly connect it
to the water inlet.
ᗺᾺㆊᅞᅩⱧⳐ
䴚
ᕒŊ͐Ң⎞ͧᖛםℤ
ℤⳐȯ
Firmly tighten the union nut when
connecting the water supply hose to
the water inlet.
⦼Ֆൕᅩℤͧᖛᾷ⎞ͧᖛם᱿Ⳑ
䴚
ᕒȯ
• Failure to do so may result in water
leakage.
䴚
ᕒ㌂⌉᱿⥾Ŋר⋱ሳភᖛȯ
How to install and remove the water supply hose
ͧᖛᾷ᱿મ⡶ᅞᘍُབྷֲᅞᘍ
One touch joint
͵࿌Ⳑݽ
Latch
ၒ༗
Latch
ၒ༗
Water supply hose
ͧᖛᾷ
Rubber ring
᭔
Rubber ring
᭔
Turn off
〦
Union nut
Ⳑ
䴚
ᕒ
Main unit
ᑨ㋤
Ș
Removing
བྷֲᅞᘍ
• Loosely tightened union nut will cause water
leakage.
Ⳑ
䴚
ᕒॖʃეℤŊר⋱ᮟᮝភᖛ⩽ȯ
• When removing the hose, unscrew the union
nut fi rst.
བྷֲᆹŊეʁⳐ
䴚
ᕒŊ֯רབྷぜȯ
• Please use the water supply hose and one
touch joint supplied in the package.
⦼͐ᮢらᑨⶪह᱿ͧᖛᾷُ͵࿌Ⳑݽȯ
• The appliance is to be connected to the water
mains using new hose set and that old hose-
set should not be reused.
ະ͐ᮢえ᱿ᅘ᱿ⳐᖛᾷⳖ⠗ⳐŊ⎡᱿Ⳑ
ᖛᾷʃവҪᓝ͐ᮢȯ
Attention
ᘜา
Attention
ᘜา
Installation
મ⡶
Summary of Contents for BW-V80BS
Page 59: ...Јൡ ...