--- 3 ---
(6) Dust collector set available as option
A dust collector set is available as an optional accessory for the Model C 7D. When the cutting operation
produces bothersome saw dust and wood chip dispersion, particularly in indoor use, attaching the dust
collector set to the main body and connecting it to a vacuum cleaner will minimize dust dispersion for cleaner
and more comfortable operation.
The blade edges are lit by the spotlight when
pressing the off-lock lever. (The spotlight is turned
on before the saw blade begins to rotate.)
The spotlight keeps lighting as long as the switch
trigger is depressed.
The off-lock lever automatically returns to off-position
and the spotlight is turned off when the switch trigger
is released.
(4) 90˚ fine adjustment screw underneath the base
The Model C 7D is equipped with a base that can be inclined
up to 45˚, and a 90˚ fine adjustment screw that makes the
angle between the base and a saw blade square for accurate
90˚ cutting.
(5) High-strength scratch-resistant Ni-plated cast aluminum base
The Model C 7D is equipped with a very strong and scratch-
resistant Ni-plated cast aluminum base.
(3) Convenient spotlight for lighting blade edges and cutting lines
The Model C 7D is equipped with a spotlight for lighting blade edges. The working efficiency is improved
because the spotlight helps to align the saw blade with a premarked cutting line even in a dimly lit workplace.
Because the light switch and the off-lock lever are integrated into one switch, the switch operation is easy and
the spotlight can be lit before starting the saw blade. The spotlight is automatically turned off when turning off
the power switch. A standard automotive light bulb is used for the spotlight.
The off-lock lever and the light switch
are integrated into one switch.
1
3
2
Off-lock lever
(Doubles as a
light switch)
Switch trigger
Square
Base
Wing bolt (A)
90˚ fine adjustment screw
Summary of Contents for C 7D
Page 25: ......
