--- 4 ---
5. SPECIFICATIONS
Type of motor
Cutting depth
at 90˚
Type of switch
at 45˚
Rotation speed
Model
Saw blade diameter
Type of handle
Battery
(Type EB 2420)
Charger
(Model UC 24YFB)
Overcharge prevention circuit:
A built-in electronic circuit detects the output voltage or surface temperature of the storage
battery, and automatically turns off the unit to prevent overcharge.
Enclosure
Charger
Battery
No-load
Housing, handle cover
Gear cover, safety cover
Nominal service life
Nominal capacity
Charging time
Type of battery
Nominal voltage
Applicable ambient temperature
Malfunction in the battery or the
charger
The battery temperature is high,
marking recharging impossible.
Indication of the pilot lamp
Before
charging
While
charging
Charging
complete
Charging
impossible
Charging
impossible
Blinks
(Red)
Flickers
(Red)
Lights
(Red)
Blinks
(Red)
Lights
(Green)
Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Lights continuously.
Lights for 0.1 seconds. Does not light for
0.1 seconds. (off for 0.1 seconds)
Lights continuously.
Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Weight
Main body (including battery) ............... 5.0 kg (11 lbs.)
Charger unit (including cord) ................ 0.6 kg (1.3 lbs.)
Main body, charger, case and other
standard accessories ............................ 9.5 kg (21 lbs.)
Net
Gross
Standard accessories
Charger (UC 24YFB) .................................................. 1
Saw blade ................................................................... 1
Box wrench ................................................................. 1
Plastic tool case .......................................................... 1
0 --- 47 mm (0 --- 1-27/32")
0 --- 60 mm (0 --- 2-3/8")
D type
Trigger switch (automatic return type with switch-lock)
DC magnet motor
185 mm (7-1/4")
C 7D
Die-cast aluminum alloy
Glassfiber reinforced polyamide resin
2,700/min.
Glassfiber reinforced polycarbonate resin
ABS resin
Charging/discharging: approximately 1,000 cycles
2,000 mAh
50 minutes (with standard accessory charger at ambient
temperature of 20˚C (68˚F))
Sealed cylindrical nickel cadmium battery
DC 24 V
0˚C --- 40˚C (32˚F --- 104˚F)
Summary of Contents for C 7D
Page 25: ......
