– 18 –
English
MAINTENANCE
MAINTAINING YOUR TABLE SAW
For your own safety, turn the switch off and remove the plug from the power source outlet before maintaining
or lubricating your table saw.
GENERAL MAINTENANCE
Occasionally use a cloth to wipe off chips and dust from the machine. And oil the rotary parts once a month to extend
the tool life. Do not oil the motor.
Brush Inspection
Check the motor brushes after the fi rst 50 hours of use for a new machine or after a new set of brushes have been
installed. After the fi rst check, examine them every 10 hours of use.
When the carbon is worn to 6 mm in length or if the spring or shunt wire is burned or damaged, replace both brushes. If
the brushes are found serviceable after removing, reinstall them.
WARNING
EC-DECLARATION OF CONFORMITY
Rexon Industrial Corp., Ltd. declares this Table Saw, Model C12RA, is in conformity with the Low Voltage Directive
73/23/EEC and the Amendment Directive 93/68/EEC and the Machinery Directive Annex 1 of 98/37/EC and EMC
Directive 89/336/EEC.
George Ku, Marketing manager
Date: Oct. 02, 2006
Rexon Industrial Corp., Ltd.,
261 Jen Hwa Road,
Tali, Taichung 412
Taiwan, R.O.C.
