Manual Tuning
Manual tuning can be used for
a)
Tuning and storing local TV channels and other equipment connected in the
aerial system, such as VCR and satellite receiver.
b)
Moving Auto-tuned channels, (see Move Stored Channels below).
c)
To reduce unwanted interference.
Press the YELLOW key twice. The
SETUP
menu will appear on your screen. See illustration in step 4 of
Tuning Your Television.
Item 2 explains how to tune BBC 1 and store it as PROG 01 (You can select any PROG number you want between 00 and 57)
The TUNING menu will appear on the screen
.
a)
Press or to change the
PROG
number to 01
.
b)
Press to move the cursor to
MANUAL.
c)
Press to start manual tuning. Each time a channel is
found the search will stop.
Press the GREEN key.
d)
Press again until BBC 1 is found.
e)
Press to move the cursor to
STORE.
TUNING
f)
Press to store BBC 1 as PROG 01.
g)
Press to return to
PROG
to select the next number.
Continue steps a to g until all your channels are tuned.
Press the
TV
key to return to normal viewing or, if you want to name
your TV channels, press the GREEN key (
SETUP
), and follow the
instructions in step 5 of
Tuning Your Television.
Move Stored Channels
Note:
Make sure you are in television mode by pressing the
TV
key before continuing.
Press the YELLOW key twice. The
SETUP
menu will appear on your screen. See illustration in step 4 of
Tuning Your Television.
Using the
Arrow
keys , , , , on your remote control, move the cursor onto the channel you want to move.
Moving a stored channel will copy your choice into its new location erasing any channel already stored there. To avoid this happening, it is
recommended that you first move the channels to temporary locations beyond the range of the stored programmes before copying them back in
the order you want. It is not necessary to move any channel that is already where it should be. See the following diagram.
Note:
When you move a channel the channel name is not moved, so programs should be named after they have been moved.
Press the GREEN key.
MANUAL
Note:
To clear the old channel location, select the
SETUP
menu, (
Green
key), move the blue bar with the
Arrow
keys to the old
channel number, press and hold the
Yellow
key (
SKIP
) until the
SKIP
prompt disappears.
Picture Controls Menu
1
1
2
2
TUNING
PROG
00
BAND
UHF
MANUAL
››››
FINE
››
›
››››
STORE
SETUP
Select
∨
∧
Adjust
<
>
Page 4
Original
Temporary
Final
1------------------------------>--------------------------------
1
3-------------->--------------22-------- ----->----------------
2
5-------------->--------------23------------->----------------
3
4------------------------------>--------------------------------
4
2-------------->--------------25------------->----------------
5
The manual
TUNING
menu will appear on your screen.
a)
Press or to change the programme number.
b)
Press to move the blue bar to
STORE
.
c)
Press or to store the new number. (See note below)
Press the
TV
key to return to normal viewing.
TUNING
PROG
01
BAND
UHF
MANUAL
››››
FINE
››
›
››››
STORE
SETUP
Select
∨
∧
Adjust
<
>
