Hitachi C2844S, Instructions For Use Manual

ENGLISH   

- 11 -

Sleep Timer

As you enter the Feature menu, 

SLEEP TIMER

 will be the first

selected option. Use “ ” or “ ” button to change the Sleep

Timer values between 

OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00,

1:15:00, 1:30:00, 1:45:00

 and 

2:00:00

.

It is displayed on the upper right of the screen. If sleep timer is

activated it is displayed with the TV status and erased with it

after 3 seconds.

If there is left only one minute of the down counting of the timer,

it is displayed automatically on the upper right of the screen,

and stayed there until finishing. Then TV goes automatically to

stand-by.

Child Lock

You can use this feature to prevent children turning on TV or

changing programs or adjustments etc. without remote con-

trol.
The 

CHILD LOCK

 feature can be set by “ ” or “ ” button to

either 

ON

 or 

OFF

. When 

OFF

 is selected, there will be no differ-

ence in the operation of your TV. When 

ON

 is selected, the TV

can only be controlled by the remote control handset. In this

case, the front panel buttons (except the Switch On/Off button)

will not work.

Selecting Menu Language

Menu language can be chosen by pressing “ ” or “ ” button

on 

LANGUAGE

 item.

AV-2 OUTPUT

From 

AV-2

OUTPUT

, either TV or 

AV-1

 can be given. 

TV

 or

AV-1

 can be chosen by pressing “ ” or “ ” button on "

AV-2

OUTPUT

".

To Store Settings

In Feature menu all settings are stored automatically.

Install Menu

• To enter the Install menu directly, press the 

BLUE

 button, or

• Press "

" button, now you are in Main menu. In the Main

menu, select “

INSTALL.

” using “ “ or “ ” button. Then enter

the Install menu pressing “ ” or “ ” button.

Selecting Programme

To select programme number, you can use “ ” or “ ” button,

Digit Buttons or The Double Digit button with digit buttons.

Selecting Band

BAND, can be chosen either,
• VHF1, VHF3 or UHF by “ ” or “ ” button.

Standard

The  "

Standard

"  setting  is  fixed  to  "

I

".  You  cannot

change this item's setting.

Selecting Search

To start the search process, press “ ” button for forward
search or “ ” button for backward search. 

SEARCH

 item

blinks during search process, since the process is stopped

or signal is found. During search process the semi-transpar-

ent menu background becomes "

BLUE

". To stop the search

process “ ” or “ ” button must be pressed again.

Selecting Fine Tuning

You can use the Fine Tuning process for fine adjustment (af-

ter coarse adjustment), if you are not happy about the image

on the screen.
Use “ ” or “ ” button on 

FINE TUNING

 item, until getting the

best image on the screen.

To Store Settings

Press “ ” or “ ” button on 

STORE

 option to store Install menu

settings.

ENG-(C2844S)-2850M-3040-AK37-ST1P-VST-50041887.p65

26.06.2003, 11:04

11