No.
Item
Description
Default
Value
Supported
LPAR
manager
Version
F7: Removes an LPAR definition.
F8: Switches from the LPAR manager
screen to an LPAR screen.
F9: Saves the LPAR manager configuration.
Alt+t: Refreshes the LPAR manager screen
display.
Alt+r: Shutdown the LPAR manager
system.
F3, F5, F6, and F7 are not available on the
LPAR where LPAR migration has failed.
(5)
LPAR
manager
firmware
version
Displays the LPAR manager firmware
version and the LPAR manager firmware
internal version.
-
01-0X~
How to Return to the LPAR manager Menu from Each LPAR manager
Screen
Press Esc on each LPAR manager screen. If there are no settable items on
the displayed screen, the cursor is always positioned on the Esc: Menu
display. Pressing Enter in this status returns to the LPAR manager Menu
screen.
How to Activate (turn on) an LPAR
Press F3: Act in this screen to display a sub-screen, place the cursor on an
LPAR to activate on the sub-screen, and press Enter. You can perform
"Activate" only to deactivated LPARs.
How to Deactivate (Turn off) an LPAR
Note:
•
When an LPAR is deactivated, the power source of the LPAR is turned off
and a guest OS operating on the LPAR is shut down forcibly. Particularly,
when an LPAR is deactivated while the guest OS operating on the LPAR is
loading or saving data in a disk, the disk might be destroyed. So, shut
down a guest OS operating on the LPAR instead of the deactivating on the
LPAR manager screen.
•
When shutting down a guest OS operating on an LPAR, the guest OS
might be hang up in the final process. In such a case, deactivate the
LPAR. (As the connection between the LPAR and a disk has been
disconnected, the disk data is not destroyed)
7-8
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide