•
Save the configuration using F9: Save Configuration on the LPAR
manager Menu screen.
How to adjust the RTC time of LPARs to the LPAR manager system
time
The RTC time of LPARs can be set only when the relevant LPAR is
deactivated.
Case1: When synchronizes LPAR manager system time by an NTP server
(recommended)
See
How to use NTP on LPAR manager on page 7-95
Perform the procedure as below, when NTP setting has already been done.
•
Place the cursor on Adjust LPAR Time in the Date and Time screen, and
press Enter to display a sub-screen. Select the target LPAR and press
Enter.
•
This operation makes the RTC time of LPAR (logical RTC time) adjusted to
LPAR manager system time.
Figure 7-35 Date and Time Screen
•
Save the configuration using F9: Save Configuration on the LPAR
manager Menu screen.
Figure 7-36 LPAR manager Menu Screen
Case2: When do not synchronize the LPAR manager system time by a NTP
server
•
Shutdown All the guest Oss
•
Shutdown the LPAR manager
Operation by LPAR manager Screen
7-91
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide