No.
Item
Description
Default
Value
Supported
LPAR
manager
Version
When turning off the power of the
system with UPS, set LP Auto Shutdown
to "Yes".
When LPAR migration is performed, LP
Auto Shutdown is disabled, the same as
when the value is "No".
(3)
Shutdown
State
Displays the LP System Shutdown
status.
Ready: The LPAR manager system is
running.
InProgress: The LPAR manager system
is shutting down.
When the LPAR manager system is shut
down using the power control schedule
of ServerConductor / Blade Server
Manager, the shutdown state becomes
InProgress when the shutdown time
arrives. In this case, it is possible to
cancel the shutdown then.
-
01-0X~
(4)
LP
ErrorWatching
Sets whether or not to detect the hang-
up of LPAR manager itself.
Yes: Detects an LPAR manager hang-
up.
When detecting an LPAR manager
hung-up, collects an LPAR manager
dump automatically and reboots an
LPAR manager.
No: Does not detect an LPAR manager
hang-up.
Yes
01-0X~
(5)
PhyCPU C-
State (>= C3)
Sets Power Saving Function.
Enable: Enabling Power Saving
Function.
Disable: Disabling Power Saving
Function.
For CB 520H B2 model, Power Saving
Function is not supported. Power saving
effect is not obtained when Power
Saving Function is enabled.
Enable
01-0X~
(6)
USB Auto
Allocation to
LPAR
Specifies whether USB Auto Attach is
enabled or
disabled.
Enable: A USB device is automatically
attached when the LPAR is activated /
reactivated.
Disable: A USB device is automatically
attached only to specified LPARs.
Enable
01-0X~
7-106
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide