No.
Item
Description
Default
Value
Supported
LPAR
manager
Version
(7)
Save
Changed
Config
Format
Specifies whether the configuration is
automatically saved after the
configuration format is changed when
the LPAR manager boots.
- After a format for an LPAR manager
configuration is changed automatically
when the LPAR manager boots.
- When an LPAR manager configuration
is not saved and you shut down the
LPAR manager.
Enable: An LPAR manager configuration
is saved automatically.
Disable: An LPAR manager
configuration is not saved
automatically.
Disable
01-0X~
(8)
LP
TimerCounter
Base
Sets a value for timer counter
calculation.
TSC: Based on TSC (default).
Cpu Frequency: Based on CPU
frequency.
LP TimerCounter Base is displayed
when the timer precision of "TSC" is
lower during operation, you can select
"TSC" or "Cpu Frequency". Select the
smaller one for time-lag. LP
TimerCounter Base is not displayed
when the timer precision of "TSC" is
higher, "TSC" is operated.
TSC
01-3X~
(9)
Save Time
Config
Sets whether or not to automatically
save adjusted time configuration of
LPAR manager system time and LPAR
time in physical RTC and LPAR manager
configuration information.
Enable: Enables the Save Time Config.
Disable: Disables the Save Time Config.
Disable
01-6X~
(10) Safe Mode
Displays whether the safe mode is on.
Cancels safe mode.
ON: Safe mode
OFF: Normal state
This item is not displayed in the
firmware combination. For the firmware
".
Note that this item is displayed for
02-56 or higher of LPAR manager
OFF
02-2X~
Operation by LPAR manager Screen
7-107
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide