If all the LPARs are not deactivated within 30 minutes from the start of
shutdown processing, the shutdown processing is canceled and the shutdown
status returns to Ready. This also removes the suppression of LPAR
activation.
How to set LPAR manager hang-up detection
Position the cursor on LP ErrorWatching of System Control and press Enter to
display a sub-screen. Move the cursor with the
↑
and
↓
keys to select Yes or
No and press Enter.
How to change the Power Saving Function
All LPARs have to be deactivated when changing Power Saving Function.
Place the cursor on PhyCPU C-State (>= C3), and press Enter to display a
sub-screen. Place the cursor on Enable or Disable, and press Enter.
Note: Difference between Guest OS system time (also LPAR SEL time) and
LPAR manager system time increases if all the following conditions are
applied.
•
"Windows Server 2008" or later version is applied as Guest OS.
•
Application (ex. Media Player) which uses multimedia timer function is
being executed on the Guest OS.
How to change USB auto attachment function
Place the cursor on USB Auto Allocation to LPAR and press Enter to display a
sub-screen. Select Enable/Disable and click Enter.
See
PCI Device Assignment on page 7-39
for USB auto attachment setting.
How to change the Automatic Configuration save function
When changes the configuration format in booting LPAR manager or the
configuration has not been saved at the LPAR manager shutdown, the
configuration is saved automatically.
The automatic configuration save function is not a periodical.
If you convert the configuration information format when LPAR manager is
activated, LPAR manager operates as follows, depending on the setting of the
configuration information auto save functionality.
No.
Configuration information auto save functionality
Supported
version
Disable
Enable
(1)
Sends an alert notification about conversion of the configuration
information format after LPAR manager has been initialized.
01-0X or
later
(2)
Outputs the following message
and suppresses the operation
Automatically saves the
configuration information.
01-0X or
later
Operation by LPAR manager Screen
7-111
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide