Message Content
LP-LFW detected internal error.
Explanation
LPAR manager logical firmware detected an internal error but it
recovered.
What to do
If this LP System Logs is often collected, contact your reseller or
maintenance personnel.
Message Content
LP-LFW detected tftp error.
Explanation
LPAR manager logical firmware detected the network failure at
the time of network boot.
What to do
Reset a network load situation and execute network boot again. If
the system log is still taken after executing again. Contact the
reseller from which you purchased this equipment or consult
maintenance personnel.
Message Content
Lock timeout was recovered.
Explanation
A lock timeout occurred.
What to do
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content
Logical CPU slowdown due to too many logical CPUs.
Explanation
Detected a performance decrease by an excess of LPAR numbers
and logical CPU numbers.
What to do
Reset the LPAR number and Logical CPU number.
Although this event may be displayed in the shutdown of OS, or
the Deactivate status of LPAR, it is no problem when "Logical CPU
performance returns to normal" is outputted within several
minutes.
Message Content
LPAR Migration failed.
Explanation
Failed to LPAR migration
What to do
For details about the action to be taken, see the Hitachi
Command Suite Compute Systems Manager User Guide, the
Hitachi Compute Blade HVM Navigator User's Guide - Migration,
or the Hitachi Compute Blade LPAR Migration Guide.
Message Content
NTP server settings contain invalid characters.
Explanation
The incorrect character is contained in the NTP server setup.
What to do
Set the IP address of a NTP server to NTP Server 1 or NTP server
2.
Message Content
RTC time synchronization has failed.
Explanation
Synchronizing RTC with an NTP server failed.
Messages
9-43
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide