Message Content
LP Loader detected the initial parameter in SVP.
Explanation
The initial parameter file (InitParam.dat) was detected with the
management module.
What to do
None.
Message Content
LP Loader initialized the configuration files.
Explanation
The configuration information files were initialized.
What to do
None.
Message Content
LP Loader loaded configuration files from SVP.
Explanation
The configuration information files were retrieved from SVP.
What to do
None.
Message Content
LP Loader updated LP Serial Number in OEM FRU.
Explanation
Updated FRU on LPAR manager boot, since N+M was performed.
What to do
None.
Message Content
LP Loader updated VfcSeed.dat in management module.
Explanation
Updated the VfcSeed.dat file, having the Vfc seed information in
the management module.
This message is displayed when moving the server blade or
adding the server blade into the slot of the server-chassis which
operated LPAR manager in the past.
Synchronized the FRU information and the "Vfc seed information"
which is managed in management module.
What to do
None.
Message Content
This LP F/W is not supported for this blade(Compute Blade
XXXXXX).
Please install another LP F/W supported for this blade.
XXXX : Server Blade Model
Explanation
This LPAR manager firmware is not supported for this server
blade.
What to do
Please install another LPAR manager firmware supported for this
server blade.
Message Content
LP logged the EFI-Driver log for Shared FC at expansion
card.
Explanation
The shared FC driver transferred the log to LPAR manager.
What to do
None.
9-52
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide