ID
Message
Operation for which an audit log is
collected
01003103
"Failed to save the configuration."
When the LPAR manager screen is used to
request saving of the LPAR manager
configuration and the request fails
01003104
"Requested to save the configuration
for LPAR manager encryption
communication. Accept:
xxx
"
When HvmSh and so on is used to request
saving of the LPAR manager configuration of
encrypted communication. and the request is
accepted
01003106
"Set the IO connection mode of the FC
HBA. Slot#:
xxx
Port#:
xxx
VFCID:
xxx
Value:
xxx
"
When HvmSh and so on is used to request
change of the IO connection mode for a
shared FC port and the request immediately
succeeds
01003108
"Executed an unsupported command (set
VfcWWN). RelSlot:
xxx
Port#:
xxx
VFCID:
xxx
Value:
xxx
"
When HvmSh and so on is used to request
change of WWN for the shared FC port and
the request immediately succeeds
0100310C
"Executed an unsupported command (set
LPARRTCdiff). LPAR
xxx
Value:
xxx
"
When HvmSh and so on is used to request
change of time difference between the LPAR
RTC time and the LPAR manager system time
(for LPAR relocation) and the request
immediately succeeds
0100310E
"Executed an unsupported command (set
ActInhibit). LPAR
xxx
Value:
xxx
"
When HvmSh and so on is used to request
change of LPAR activation inhibit and the
request immediately succeeds
01003110
"Executed an unsupported command (set
AutoVnicMac). LPAR
xxx
VnicSystemNo:
xxx
LPAR#:
xxx
"
When HvmSh and so on is used to request
information that is used in automatic
generation of a MAC address for a logical NIC
port (for LPAR relocation) and the request
immediately succeeds
01003112
"Executed an unsupported command (set
VfcIdChangeInhibit). LPAR
xxx
Value:
xxx
"
When HvmSh and so on is used to request
setting of VFCID change inhibit (for LPAR
relocation) and the request immediately
succeeds
01003114
"Requested to add the processor group.
Accept:
xxx
ProcessorGroup#:
xxx
"
When HvmSh and so on is used to request
addition of a processor group and the request
is accepted
01003116
"Added the processor group.
ProcessorGroup#:
xxx
"
When the LPAR manager screen is used to
request addition of a processor group and the
request succeeds
01003117
"Failed to add the processor group.
ProcessorGroup#:
xxx
"
When the LPAR manager screen is used to
request addition of a processor group and the
request fails
01003118
"Requested to remove the processor
group. Accept:
xxx
ProcessorGroup
xxx
"
When HvmSh and so on is used to request
deletion of a processor group and the request
is accepted
0100311A
"Removed the processor group.
ProcessorGroup
xxx
"
When the LPAR manager screen is used to
request deletion of a processor group and the
request succeeds
9-74
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide