![background image](http://html.mh-extra.com/html/hitachi/cb-520a-a1/cb-520a-a1_user-manual_145947498.webp)
PCI-Device
Support
Dedicated
Shared
Exclusive
shared
2
.
Modes other than NIC and FCoE are not available.
Set the Personality to NIC or FCoE.
See the Hitachi Compute Blade Emulex Adapter User's Guide for Hardware for
setting it.
However, it cannot be changed in LP mode. If necessary, change it in Basic mode.
3
.
In LPAR assigned shared NIC or virtual NIC, the NIC (Intel 82576) is recognized as a
1Gbps of NIC on a guest OS.
4
.
In LPAR assigned shared NIC or virtual NIC, total throughput is about 3Gbps per
LPAR manager.
5
.
Supported in LPAR manager firmware version 02-2X or later.
For details about the supported fibre channel adapter versions, see the HITACHI
Gigabit Fibre Channel Adapter User's Guide (Support Matrix Edition).
OSs which LPAR manager supports
OSs which LPAR manager supports are shown in the table below.
Table A-3 OSs which LPAR manager supports
Item
Support (version)
Guest OS
CB 520H A1/B1
Windows Server 2008 SP2
Y (01-0X or later)
Windows Server 2008 R2
Y (01-0X or later)
Windows Server 2008 R2 SP1
Y (01-0X or later)
Windows Server 2012
Y (01-3X or later)
Windows Server 2012 R2
Y (01-9X or later)
Windows Server 2016
-
Red Hat Enterprise Linux 5.7
Y (01-2X or later)
Red Hat Enterprise Linux 5.9
Y (01-7X or later)
Red Hat Enterprise Linux 6.2
Y (01-0X or later)
Red Hat Enterprise Linux 6.4
Y (01-5X or later)
Red Hat Enterprise Linux 6.5
Y (01-9X or later)
Red Hat Enterprise Linux 6.6
Y (02-06 or later)
Red Hat Enterprise Linux 6.7
Y (02-45 or later)
Red Hat Enterprise Linux 6.8
Y (02-56 or later)
Red Hat Enterprise Linux 6.9
-
Red Hat Enterprise Linux 7.1
Y (02-40 or later)
Red Hat Enterprise Linux 7.2
Y (02-45 or later)
A-4
Setting Item Catalogue
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide