GB
- 10 -
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
Picture Menu
• To enter the Picture menu directly, press the “
GREEN
” button,
or
• Press "
" button, now you are in Main menu. In the Main
menu, select “
PICTURE
” using “ “ or “ ” button, then enter
the Picture menu pressing “ ” or “ ” button.
Setting Brightness
• As you enter the picture menu, Brightness will be the first
selected option.
• Press “ ” button to increase brightness.
• Press “ ” button to decrease brightness.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
4:3
Setting Contrast
• Using “ “ or “ ” button select Contrast.
• Press “ ” button to increase contrast level.
• Press “ ” button to decrease contrast level.
Setting Colour
• Using “ “ or “ ” button select Colour..
• Press “ ” button to increase colour level.
• Press “ ” button to decrease colour level.
Setting Sharpness
• Using “ “ or “ ” button select Sharpness.
• Press “ ” button to increase sharpness.
• Press “ ” button to decrease sharpness.
Mode
This item is used to change the picture size. By pressing “ ”
or “ ” button you may choose one of these options: “4:3”,
“16:9” and “AUTO”. It is also possible to change picture modes
directly by pressing button “
” on your remote control.
•
4:3
This option forces the picture ratio to 4:3 mode.
•
16:9
This option forces the picture ratio to 16:9 mode.
•
AUTO
This allows to change the picture mode automatically,
according to the transmission of the selected channel. For
example, your TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the AUTO mode, the TV
is switched to 16:9 mode automatically. If the TV is in 4:3
mode and the picture ratio of the channel is also 4:3, there will
be no affect selecting the picture mode to AUTO mode.
WSS feature is only used in
TV
and
F-AV
modes. For the Pic-
ture Mode selection in
AV-1
the pin 8 (of Scart) value is used.
In
RGB
modes the Picture Mode can be 4:3, 16:9 (Auto mode
is not available.).
When the menu appears on screen, picture mode will auto-
matically change to its default tube mode (4:3 or 16:9) but it
will turned to its stored mode when the menu disappears.
To Store the Settings
• Press “ ” or “ ” button on
STORE
option to store Picture
menu settings except Picture Mode.
Feature Menu
• To enter the Feature menu directly, press the “
YELLOW
”
button, or
• Press "
" button, now you are in Main menu. In the Main
menu, select
FEATURE
using “ “ or “ ” button. Then enter the
Feature menu pressing “ ” or “ ” button.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p65
13.07.2004, 13:26
10