31
English
FUNCTIONAL DESCRIPTION
1. Switch ON (
Fig. 4
)
The blade starts moving by pulling the trigger
of the main handle while holding the sub
handle.
2. Switch OFF (
Fig. 4
)
The blade stops moving by releasing the
trigger of the main handle or the sub handle.
3. Blade case (
Fig. 5
)
When the hedge trimmer blade is to be
attached to or removed from the tool, or when
the shear is not used, place the blade in the
blade case to prevent injury.
WARNING
Be sure to turn the tool o
ff
and remove
the battery from the tool before attaching
and removing the blade case or blade
cover.
CAUTION
To prevent injury, take care when placing
the blade in the blade case.
REPLACING THE BLADE
The blade is a consumable that has to be replaced with a new blade when it loses sharpness.
Follow the steps below to replace the blade.
The tool shown in the illustration is the hedge trimmer, and it is used in examples to explain
features.
Before replacement, turn the switch on and o
ff
until the teeth in the upper blade are positioned
over the openings between the teeth in the lower blade.
At this time, be careful of the moving blade.
WARNING
Be sure to turn o
ff
the power switch and remove the battery from the tool to
prevent accidents.
CAUTION
Before blade replacement, be sure to use gloves and attach the blade case or
blade cover to prevent the blade from coming into direct contact with your hands
or face.
Sub handle
Trigger
Main handle
Fig. 4
Blade
Blade case
Fig. 5
000Book̲CH14DSL̲ChS.indb 31
000Book̲CH14DSL̲ChS.indb 31
2017/04/17 13:48:35
2017/04/17 13:48:35
