Hitachi CL1426T, Instruction Manual

GB   

- 39 -

Picture Menu

• To enter the Picture menu directly, press the “

GREEN

” button,

or

• Press "

" button, now you are in Main menu. In the Main

menu, select “

PICTURE

” using “ “ or “ ” button, then enter

the Picture menu pressing “ ” or “ ” button.

Setting Brightness

• As you enter the picture menu, Brightness will be the first

selected option.

• Press “ ” button to increase brightness.
• Press “ ” button  to decrease brightness.

%5,*+71(66

&2175$67

&2/285

6+$531(66

02'(

6725(

Setting  Contrast

• Using “ “ or “ ” button select Contrast.
• Press “ ” button to increase contrast level.
• Press “ ” button to decrease contrast level.

Setting Colour

• Using “ “ or “ ” button select Colour.
• Press “ ” button to increase colour level.
• Press “ ” button to decrease colour level.

Setting Sharpness

• Using “ “ or “ ” button select Sharpness.
• Press “ ” button to increase peaking level.
• Press “ ” button to decrease peaking level.

Mode

This item is used to change the picture size.
By pressing “ ” or “ ” button you may choose one off three

options. These are, “4:3”, “16:9” and “AUTO”.
•

4:3

 This option forces the picture ratio to 4:3 mode.

•

16:9 

This option forces the picture ratio to 16:9 mode.

• 

AUTO 

This option is available only if your TV has WSS feature.

This allows to change the picture mode automatically, ac-

cording to the transmission of the selected channel. For

example, your TV is 4:3 mode, but the transmission of that

channel is in 16:9 mode. If you select the AUTO mode, the TV

is switched to 16:9 mode automatically. If the TV is in 4:3

mode and the picture ratio of the channel is also 4:3, there will

be no affect selecting the picture mode to AUTO mode.

WSS feature is only used in TV and F-AV modes. For the Pic-

ture Mode selection in AV-1 the pin 8 (of Scart) value is used.

In RGB modes the Picture Mode can be 4:3 or 16:9 (Auto mode

is not available.).

To Store the Settings

• Press “ ” or “ ” button on 

STORE

 option to store Picture

menu settings.

The stored picture mode setting will be valid only in current

program. However, the other stored values in Picture Menu will

be valid for all the programmes

Feature Menu

• To enter the Feature menu directly, press the “

YELLOW

”

button, or

03-ENG-(CL1426T)-1460AV-3040-AK36-MN1P-VST-LL-T3X-5003XXXX.p65

17.04.2003, 15:58

39