GB
- 9 -
as you change the language, the menu items will be
displayed in the selected language.
By pressing the or buttons, come to the
Tuning Mode item and select the mode at which your
TV will run the
A.P.S.
. If you select
Channel
Tuning
Mode,
A.P.S.
will run according to Channel Tuning
Mode and will auto-search according to the Channel
numbers of the stations in your area. If you select
Fre-
quency
Tuning Mode,
A.P.S.
will run according to
Frequency Tuning Mode and will auto-search accord-
ing to the frequencies of the stations in your area.
After selecting the Tuning Mode if you want to start
A.P.S.
, by pressing the up and down buttons, come to
the
Start
item and by pressing
or
button
start the
A.P.S.
.
If you do not want to start
A.P.S.
, you can cancel it by
pressing the
TV
button on your remote control.
When you start
A.P.S.
the below menu will appear on
the screen.
$36 ,6 5811,1*
3/($6( :$,7
&$1&(/
Operating with the buttons on the TV set
Volume setting and programme selection can be made
using the buttons on the front of the TV.
Volume Setting
Press
-
button to decrease volume or
+
button to increase volume, so a volume level scale
(slider) will be displayed in the lower middle side of the
screen.
Programme Selecting
Press
P/CH+
button to select the next programme
or
-P/CH
button to select the previous programme.
Entering MENU
Press
MENU
button to enter the
MENU
. In the
MENU
select sub-menu using
-P/CH
or
P/CH+
button and
enter the sub-menu using
-
or
+
button. To
learn the usage of the menus, refer to the Menu Sys-
tem section.
Operating with Remote Control
The remote control handset of your TV is designed to
control all the functions of the model you selected. The
functions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in Menu
System section.
Volume Setting
Press
button to increase volume. Press
but-
ton to decrease volume. A volume level scale (slider)
will be displayed at the middle of the bottom on the
screen.
Programme Selecting (Previous or next
programme)
Press button to select the previous programme.
Press button to select the next programme.
Programme Selecting (direct access)
Press digit buttons on the remote control handset to
select programmes between 0 and 9. TV will switch to
the selected programme. To select programmes between
10 - 99, you must use the double digit button
- -
.
this OSD is displayed at the left hand upper on
this screen.
Press the digit buttons consecutively for the channel
you wish to watch (e.g for channel 27, first press 2 then
7). If you do not press the second digit within 3 sec-
onds of pressing the first, the display will disappear.
01-2853WMAV-1244UK-ENG-ST7P-AK45-MULTI-PLL-FS-CLED-50052079.p65
13.07.2004, 11:04
9
