-27-
18. Disassembly and reassembly of the front handle
[Tools required]
• Hex. bar wrenches (4 mm and 5 mm)
• Phillips screwdriver
(1) Disassembly
• Loosen the two Tapping Screws D4 x 16
[109]
by using a Phillips screwdriver, and remove Grip End
(A)
[145]
and Grip End (B)
[122]
.
• Loosen the Bolt M6 x 20
[119]
by using a hex. bar wrench (5 mm), and remove the Antivibration Spring
[120]
.
• Loosen the two Bolts M5
[207]
by using a hex. bar wrench (4 mm), and remove the Front Adapter
[121]
, Front Handle
[117]
, Lower Guard
[202]
, Front Foot Holder
[204]
, and Front Foot Plate
[206]
.
• Remove the two Front Foot Rubbers
[205]
from the Front Foot Holder
[204]
.
• Loosen the four Bolts M5 x 12
[62]
by using a hex. bar wrench (4 mm), and remove the Muffler Guard
[203]
.
(2) Reassembly
Reassembly can be conducted by reversing the disassembly procedure. However, special attention
should be given to the following items.
• Fit the pawls of the Front Foot Holder
[204]
into the grooves of the two Front Foot Rubbers
[205]
.
• Front handle
[203]
[58]
[62]
[207]
[206]
[205]
[145]
[117]
[119]
[122]
[204]
[120]
[121]
[109]
[202]
[205]
[204]
Fit the pawls of the Front Foot Holder
[204]
into
the grooves of the two Front Foot Rubbers
[205]
.