Hitachi CM-N28000BF, Instructions Manual

-6-

Example for use

Step 2 "HOT MOISTURIZE" 
When you do not have much time in the morning or when you need to go out suddenly, 
you can just use “HOT MOISTURIZE.”  It only takes approximate three minutes to 
moisturize your skin thoroughly. Press the mode switch button to set to 
“HOT MOISTURIZE.”

●

●

●

●

Quick treatment (Required time: approximate 3 minutes)

Press the mode switch button and set the mode of your preferred treatment.

Quick tighten-up treatment (Required time: approximate 2 minutes)

Step 4 “COOL”

  When you want to tighten your pores or cool down your skin before applying make up, 
  you can just use “COOL.”

After 10-second preparation for cooling, it only takes 

  approximate one minute and 50 seconds to tighten the pores of your skin.

Press the 

  mode switch button to set to “COOL.”

Tighten-up treatment (Required time: approximate 5 minutes)

  Step 1 “HOT CLEANSING”
  Step 4 “COOL”
  When you want to remove fine residue remaining in pores and tighten the pores of your 
  skin, use “COOL” after using “HOT CLEANSING.” This treatment cleanses and 
  tightens the pores of your skin. After the “HOT CLEANSING” mode is finished, press 
  the mode switch button to set to “COOL.”

Step 1 "HOT CLEANSING"
Step 2 "HOT MOISTURIZE" 
Step 4 “COOL”
Standard daily moisturize treatment
After using “HOT CLEANSING,” moisturize the clean skin in “HOT MOISTURIZE and 
tighten the pores of your skin by cooling effect in “COOL.” After the “HOT MOISTURIZE” 
mode is finished, press the mode switch button to set to “COOL.”

●

●

●

Daily treatment (Basic mode) (Required time: approximate 8 minutes)

●

●

●

●

Recommended full treatment (Required time: approximate 11 minutes)

  Step 1 “HOT CLEANSING”
  Step 2 "HOT MOISTURIZE"
  Step 3 “HOT MASK”
  Step 4 “COOL”
  Care for your skin once or twice a week by using all modes.
  Fine vibrations in “HOT MASK” mode and gentle switching of the electrode will enhance 
  the moisturizing effect of lotion or mask. The cooling effect of “COOL” mode will tighten 
  the pores of your skin.

Step 1 "HOT CLEANSING"
Step 2 "HOT MOISTURIZE" 
Before you go out or when you have more time, use “HOT MOISTURIZE” after using 
“HOT CLEANSING.” This treatment moisturizes the clean skin thoroughly.

●

●

Moisturize treatment (Required time: approximate 6 minutes)

How to use

●

●

Make sure to use only 100-240V AC for power supply and use the included power 
adaptor  (this device is not rechargeable).
After the power switch is switched to “On,” the heating head warms slowly.