I N S T R U C T I O N S T O U S E R :
This equipment complies with the requirements of FCC (Federal Communication
Commission) Class A equipments provided that the following conditions are met.
(1) Video signal cables:
Double shielded
cables (so called FCC shield cable) should be used and
the outer shield should be connected to the ground.
Or, if normal coaxial cables
are used, the cables should be enclosed in metal pipes or similar way to reduce
the interference noise radiation.
(2) Power cord:
Shielded power cord should be used.
The outer shield should be connected to the
ground.
Video inputs:
The input signal amplitude must not exceed the specified level.
G E N E R A L
The
is an ultra high resolution color display designed for
engineering and workstation use:
k e y f e a t u r e s a r e :
Ultra-high resolution up to 1280 dots X 1024 lines
Full square and flatter face plate screen.
Sharp focus by in-line gun high resolution CDT 21 inch
with a 0.31 mm dot
pitch matrix.
* Higher legibility at corners with dynamic focusing system.
* Bright color picture with low distortion due to the use of an efficient high
performance deflection yoke.
* Compact chassis and low power consumption with switching power supply and self
converging system.
Ergonomically designed cabinet with tilt and swivel stand.
