Introduction
This appendix lists the user-programmable parameters for the X200 series inverters
and the default values for European and U.S. product types. The right-most column of
the tables is blank, so you can record values you have changed from the default. This
involves just a few parameters for most applications. This appendix presents the
parameters in a format oriented toward the keypad on the inverter.
Parameter Settings for Keypad Entry
X200 series inverters provide many functions and parameters that can be configured by
the user. We recommend that you record all parameters that have been edited, in order
to help in troubleshooting or recovery from a loss of parameter data.
Main Profile Parameters
NOTE:. Mark “
9
” in B031=10 shows the accessible parameters when B031 is set “10”,
high level access.
“F” Group Parameters
Default Setting
Func.
Code
Name
-FE
(EU)
-FU
(USA)
B031
=10
User
Setting
F001
Output frequency setting
0.0
0.0
9
F002
Acceleration (1) time setting
10.0
10.0
9
F202
Acceleration (1) time setting,
2nd motor
10.0
10.0
9
F003
Deceleration (1) time setting
10.0
10.0
9
F203
Deceleration (1) time setting,
2nd motor
10.0
10.0
9
F004
Cumulative power-on time
monitor
00
00
U
Inverter model
X200
MFG. No.
This information is printed
on the specification label
located on the right side of
the inverter
C
2
Appe
ndix C
C
−
2
Appendix C
