19
If you want to change the Network
con
guration to add, click the
[Change]
. A
dialog for changing the Network con
guration
as shown to the right will be displayed. Enter
IP address and subnet mask , then click the
[OK]
. Procedure to connect to the projector
will start.
Proceed to item
&RQ¿UPLQJWKH
connection to your destination
. (
30
)
If you click the
[Cancel]
, you will return to the
dialog for adding a Network con
guration.
If the entered IP address and projector's IP
address are the same, a warning dialog shown
to the right will be displayed.
Click the
[OK]
, and then enter a different IP
address from the projector's one in the dialog
for changing Network con
guration.
If the connection is not available with the
entered Network con
guration, a warning
dialog shown to the right will be displayed.
Click the
[OK]
to return to the dialog for
changing the Network con
guration, and then
enter appropriate con
guration.
If you put a check mark in the box “Not displaying con
rmation dialog for adding
Network settings”, the projector memorizes current con
guration and this dialog
is not displayed again. To display this dialog again, click Option icon in the
“LiveViewer” main menu and remove the check mark in the box “Not displaying
con
rmation dialog for adding Network settings”.
1. Connection to the network
1.5 Selecting the network connection method (continued)
• If a Network con
guration to connect to the projector has been added
on the computer, the added Network con
guration will be erased once the
application software is closed.
NOTE
