61
7.3 Event Scheduling(continued)
Date/Time Settings
(
30
)
• The internal clock’s time may not remain accurate. Using SNTP is
recommended to maintain accurate time (
31
).
• Once you turn off the projector in the SAVING mode (
SETUP menu
in the
Operating Guide
) or the AC power, the current date and time setting is reset.
NOTE
The Date/Time setting can be adjusted via a web browser.
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter “
http://192.168.1.10/
” into the address bar of the web browser, and select
Projector Web Control from the selection window.
2) Enter your user name and password, and then click the
[OK]
.
3) Click the
[Date/Time Settings]
on the main menu and configure each item.
Refer to item
3.1.8 Date/Time Settings
(
30
) for further information.
4) Click the
[Apply]
button to save the settings.
7. Other Functions
