63
7.4 Command Control via the Network (continued)
When the authentication setting is enabled, the following settings are required.
(
32
)
7) Click the
[Security Settings]
on the main menu.
8) Click the
[Network Control]
and enter the desired authentication password.
* See NOTE.
9) Click the
[Apply]
button to save the settings.
NOTE
7. Other Functions
• The Authentication Password will be the same for
Network Control
Port1 (Port: 23)
,
Network Control Port2 (Port: 9715)
,
PJLink™ Port (Port:
4352)
,
My Image Port (Port: 9716)
and
Messenger Port (Port: 9719)
.
• The new configuration settings are activated after restarting the network
connection. When the configuration settings are changed, you must restart the
network connection. You can restart the network connection by clicking the
[Network Restart]
on the main menu(
41
).
