66
4. Utilize projector – Advanced -
The projector can send an alert message to the specified e-mail addresses when
the projector detects a certain condition that is requiring maintenance or detected
an error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses
power.
NOTE
Mail Settings
(
26
)
To use the projector’s e-mail alert function, please configure the following items
through a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
• Click the
[Send Test Mail]
button in
[Mail Settings]
to confirm
that the e-mail settings are correct. The following mail will be delivered to the
specified addresses.
NOTE
Subject line : Test Mail
<Projector name>
Text
: Send Test Mail
Date
<Testing date>
Time
<Testing time>
IP Address
<Projector IP address>
MAC Address <Projector MAC address>
1) Enter
[http://192.168.1.10/]
into the address bar of the web browser.
2) Enter the Administrator ID and Password and click
[Logon]
.
3) Click
[Port Settings]
on the main menu.
4) Click the
[Enable]
check box to open the SMTP port.
5) Click the
[Apply]
button to save the settings.
6) Click
[Mail Settings]
and configure each item. Refer to the
[Mail Settings]
item in “Configuring and controlling the Projector via a Web Browser” for
further information.
7) Click the
[Apply]
button to save the settings.
4.4 E-mail Alerts
