72
4.1 Configuring and controlling the projector via a web browser (Continued)
4.1.5 Mail Settings
4. Management with Web browser software
Displays and configures e-mail addressing settings.
Item
Description
Send mail
Click
[Enable]
check box to use the e-mail function.
Configure the conditions for sending e-mail under the Alert
Settings.
SMTP Server IP Address
Configures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the
Network
Settings
. The maximum length of host or domain name is up
to 255 characters.
Sender E-mail address
Configures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Recipient E-mail address
Configures the e-mail address of up to five recipients. You
can also specify
[TO]
or
[CC]
for each address. The length of
the recipient e-mail address can be up to 255 alphanumeric
characters.
Click
[Apply]
button to save the settings.
• You can confirm whether the mail settings work correctly using
[Send
Test Mail]
button. Please enable Send mail setting before clicking
[Send Test
Mail]
.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
