background image

Phono Connectors

BNC Connections

Audio

out

Audio

in

Video

in

Video

out

SPECIFICATIONS

Picture Tube .............................................................................34cm Type A34EACO1X06
Mains Voltage ...............................................................................220 - 240V AC 50 Hz
Power Consumption ...............................................................................38 Watts
Speaker .........................................................................................................8 
Dimensions (W x H x D) cm .............................................................37 x 35.5 x 38.5
Weight ......................................................................................................11 kg

EXTERNAL CONNECTORS

Audio Output

- 0V5 nominal level
- 0V2 minimum
- 2V0 maximum at an impedance of less than 1K    .

Audio Input

- 0V5 nominal level 
- 2V0 maximum at an impedance of 10K    or more.

Video Input

- 1V0 peak-peak at 75     impedance

Video Output

- 1V0 peak-peak at 75     impedance

12V DC Supply Connections

Supply for each camera - 12V nominal/250mA maximum

RS232 Connections

13

1
2
3
4
5
6
7
8
9

Carrier Detect (CD)
Receive Data (Rx)
Transmit Data (Tx)
Data Terminal Ready (DTR)
Signal Ground
Data Set Ready (DSR)
Request To Send (RTS)
Clear To Send (CTS)
Ring Indicator (RI)

Pin No.

Summary of Contents for CPX14QE

















Reviews: